37 Locations Nationwide

E-Verify® is a registered trademark of
the U.S. Department of Homeland Security

ifti logo HPIP Logo ICAA LOGO SPFA Logo

Facebook  You Tube  twitter  Glassdoor   

Call Now!


Foam Sheathing


Tuff-R  Thermax Foil Faced Insulation Board

Tuff-R & Thermax Foil Faced Insulation Board

The most energy-efficient insulation board available. Its uniform, closed-cell structure is especially resistant to the flow of heat, and the laminated aluminum facings provide an effective moisture barrier.

These products come in a variety of finishes for both concealed and exposed applications and are recommended for agricultural, commercial and industrial buildings.

Products are available in thicknesses from 1/2″ to 4″.

Product Resources
Technical Documents


Closed-cell Extruded Polystyrene Foam

Closed-cell Extruded Polystyrene Foam

Tough, closed-cell extruded polystyrene foam with a reputation as a dependable product.

Its superior resistance to water assures long-term
R-value retention in such applications as foundation perimeters, wall insulation and drywall laminate. Available in a broad range of densities for any application. Fan fold backer board is also available for your needs. Call for details.

Product Resources
Technical Documents



High Thermal Efficiency

High Thermal Efficiency

If you’re looking for high thermal efficiency at low cost, here it is. R-Max is designed for easy installation in the following applications:

  • New frame wall construction
  • Cavity wall insulation in new masonry construction
  • Interior basement and crawl space insulation covered with minimum 1/2″ gypsum board
  • Insulation between exterior stucco finish and face brick, or frame wall construction
  • Under roof shingles over roof decks, in exposed beam and cathedral type ceilings and A-frame construction
  • Under slab thermal construction
  • Retrofit behind new exterior siding
  • Retrofit behind new interior finish of minimum 1/2″ gypsum board

Product Availability
R-Max is available in standard 4′ x 8′ and 4′ x 9′ sections with thicknesses from 1/2″ to 4″. Other sizes and thicknesses may be special ordered. Minimum order quantities may apply.

Product Resources
Technical Documents




Product Resources
Technical Documents




Alabama | Atlanta | Austin | Arizona | Arkansas | Bethlehem | Birmingham | Boston | Chicago | Cleveland | California | Colorado | Connecticut | Dallas | Delaware | Denver | Florida | Georgia | Houston | Idaho | Illinois | Indiana | Iowa | Jacksonville | Kansas | Kansas City | Kentucky | Louisiana | Maine | Maryland | Massachusetts | Miami | Michigan | Milwaukee | Minneapolis | Minnesota | Mississippi | Missouri | Mobile | Montana | Nashville | Nebraska | Nevada | New Hampshire | New Jersey | New Mexico New Orleans| New York | New York City | North Carolina | North Dakota | Ohio | Oklahoma | Oklahoma City | Ontario | Oregon | Pennsylvania | Phoenix | Portland | Raleigh | Rhode Island | Richmond | Sacramento | Salt Lake City | San Antonio | San Francisco | Seattle | South Carolina | South Dakota | St. Louis | Tampa | Tennessee | Texas | Tulsa | Utah | Vermont | Virginia | Washington | West Virginia | Wisconsin | Wyoming

Copyright © IDI Distributors Inc. 2011-2015 All Rights Reserved
Website Design and Development by Contractors Marketing LLC
THE PINK PANTHER™ & ©1964-2015 Metro-Goldwyn-Mayer Studios Inc. All Rights Reserved.

Web Email | Support Link | Apparel and Promotional Items