Spray Foam Insulation Videos

Keeping your spf equipment in proper working order can be an intimidating process. Our spray foam insulation video library has tutorials and spray foam tech tips to make sure you are knowledgeable on how to properly maintain your spray guns and other products, as well as giving updates on new products and services. Browse the library below.

Buying a Used Spray Foam Rig

When buying a used spray foam rig you have to know how to check for signs of damage. If the rig hasn’t been properly treated it may cause problems for you in the future. Watch Ken Anderson explain what to look for and other considerations when looking at used rigs.

Cold Weather Tips

If you’re in the spray foam business you know that cold weather can make it difficult to do your job properly. Get your rig ready for cold weather with these tips from Ken Anderson, IDI’s lead spray foam technician. Watch this video to learn what temperatures to keep your drums at, why you should have a heater in your rig, and more.

E-Series Bearings

If you are getting off-ratio foam from your Graco E-Series Reactor there could be an issue with your bearings.  Fixing this can be quick and easy! Ken Anderson gives you all the information you need in this tutorial.

Fusion AP Check Valve

The Fusion AP has two check valves that ensure you have a crossover inside the gun and keep material from going where it shouldn’t. To keep these check valves working properly, they must be clean. Watch this video to learn some tips on how to keep your gun clean without causing any damage.

Graco Spray Gun (Fusion) Front End Maintenance

Part 2 of our 3 part series on the Graco Fusion Air Purge Gun. Keep your Graco Fusion AP spray gun working perfectly by maintaining the front end. For step by step instructions on cleaning and maintaining your Graco spray gun check out this tutorial!

Graco Spray Gun (Fusion) Piston and Handle Maintenance

Part 3 of our 3 part series on the Graco Fusion Air Purge Gun. Watch this tutorial to find out everything you need to know about the proper cleaning and maintenance of your Graco gun’s piston and handle.

Graco Spray Gun (Fusion) Pressure Relief Procedure

Part 1 of our 3 part series on the Graco Fusion Air Purge Gun. We want to keep you safe while you operate your Graco spray gun. To relieve the pressure of the gun quickly and safely make sure you take a look at this tutorial.

Intumescent Coatings

When do you use ignition barriers over a thermal barrier or vice versa? By code, Spray foam is required to be separated from a person using some form of a barrier, but how do you know which type of barrier to use? Check out this tutorial to find out.

Keeping Moisture Out of the Isocyanate

If moist air gets into the A side drum, it can cause many problems. If your transfer pump isn’t properly cleaned, the threads won’t function properly. Watch Ken Anderson to learn best practices for keeping moist air out of your drum.