When Designing Spaces and Brand Star Studios Had a Sound Problem, Spray Foam Was the Answer
Spray foam isn't the first thing anyone thinks of when a TV studio has a sound problem. But when BrandStar Studios contacted IDI for a solution, it turned out to be exactly the right answer. Here's how we knew, and how the job got done.
Handling the Complexities of Soundproofing a Massive Commercial Space
BrandStar Studios, just north of Fort Lauderdale, Florida, is not your average production facility. It's the home of shows like Dr. Drew and Designing Places, and a go-to location for national commercials from major automotive brands. The reason car companies love it comes down to one thing: a state-of-the-art 3D video wall powered by an Unreal Engine.
Instead of loading vehicles onto trailers and sending a full crew to the desert, the mountains, the beach, and back again over weeks, a brand can bring their cars to BrandStar and shoot every scene in days. The wall creates photorealistic 3D environments that move with the camera. Ceiling sensors communicate in real time with the wall display, so as the camera shifts, the background shifts with it.
That same studio was also expanding into live TV productions with in-person audiences. More shows, bigger reach, higher sound standards.
There was just one problem. The only location available for this facility sat right by the airport and next to a railroad track.
For a production studio where perfect audio and video are the products, that's a serious challenge. You could easily hear the train rumble by and planes flying over. Moving wasn't realistic. So BrandStar started asking questions about what could be done with the building they had.
That's when they called IDI.
Not Every Insulation Project Is About R-Value
Most people associate spray foam with energy efficiency. Tighter envelopes, lower utility bills, and more comfortable buildings. And, while those will still be added benefits to the studio, spray foam is also one of the most effective tools available for sound attenuation.
BrandStar's question was simple. Would open cell foam help reduce the reverberation and sound transfer coming from the airport, the train, and the surrounding businesses?
The answer was yes. Open cell spray foam applied to the ceiling would help decrease the sound transmission without needing to move wiring and could be installed faster than other materials that were being considered for the job. And while it wasn't going to eliminate every decibel from a passing freight train, it would give BrandStar the level of sound control they needed to run a working production studio with a live audience venue, in a challenging location.
That's building science. Knowing not just what a product does, but whether it's the right product for the problem in front of you.
IDI Managed the Complexity, Start to Finish
Once the decision was made to move forward with open cell spray foam, IDI didn't just hand off a product recommendation and step back. We were involved throughout the project, helping manage the complexity of a job that had more moving pieces than a typical commercial insulation job.
The biggest concern going in was protecting BrandStar's technology. That 3D video wall is worth a million dollars, and its backside is covered in cables, connectors, and electronics. The ceiling sensor system that creates the parallax effect, the one that makes the wall appear three-dimensional as the camera moves, had to be carefully removed before spraying and reinstalled after. Every Cat5 cable, every HVAC run, every speaker mount had to be wrapped and protected.
The floor presented its own challenge. The lift couldn't roll freely across the studio surface, so we moved plywood board by board to create a safe path for the equipment. It's the kind of problem-solving that doesn't show up in a product spec sheet but makes the difference between a job that goes smoothly and one that doesn't.
None of that is glamorous work. But in a facility where a single mistake during prep could damage irreplaceable equipment, there's no cutting corners.
The Spray: Open Cell Foam in South Florida Heat
On the spray side, we used Natural Polymers open cell foam. In a sound attenuation application like this one, making great foam matters as much or more than thermal performance. Spraying on metal decking with a hot roof above you means drum temperatures have to be dialed in carefully, warm enough for superior yield, but not so hot that the foam starts to shrink. Temperature management on a job like this is not something you have to know how to figure out on the fly.
Safety is critical! PPE requirements on a commercial job are non-negotiable. Our sprayer ran a hood with a Bullard fresh air pump at 5 CFM. When wearing a full protective suit in the South Florida humidity, it's a demanding day. 25 feet or more from the sprayer, helpers can use P100 organic vapor cartridge respirators, but inside the spray zone, you're on fresh air, wearing dipped gloves, fully covered.


Finishing with No-Burn
Once the spray foam ceiling was cured and inspected, the final application step was No-Burn intumescent coating applied directly over the open cell foam before black dry fall paint went over everything else. The intumescent coating is required so the job meets fire code. For this project we ran approximately 100 square feet per gallon, though on most foam substrates you'll normally need closer to 114-115 square feet per gallon at 14 mils, depending on the spray foam being covered.
Because of their heavy solids and high viscosity, mixing is crucial to make the product easier to spray. You need a drywall mud paddle, not a paint spindle, and five full minutes of mixing to drop the viscosity properly. Cut a hole in the top of the bucket for the paddle so you're not throwing product out the sides. Buckets can be mixed 30 to 60 minutes ahead to stay in front of the sprayer, but anything sitting more than an hour needs to be mixed again.
We ran a Titan 840 sprayer with a 525 tip and verified coverage with a mil gauge. The mil gauge reads off the back of your hand and shows you exactly what's on the surface. On a job like this, you verify. Every time.


The Result
BrandStar Studios can now record and produce content while planes fly overhead and trains roll past outside. The sound transfer and reverberation problems that made the location a liability are under control. They were thrilled with the outcome.
That's what building science expertise looks like in practice. Not just selling a product, but understanding the problem well enough to know which product solves it, and then seeing the job through to make sure it gets done right.
Have a Building Science Challenge? Let's Talk.
Whether you're a spray foam contractor looking for expert support on a complex job, or a facility owner dealing with a sound, energy, or building performance problem you're not sure how to solve, IDI's team is here to help. Reach out to your local IDI branch and let's figure it out together.