Safety Is Your Priority & Ours

No matter what insulation project you’re working on safety is always a concern, at IDI we pride ourselves in providing top-notch safety equipment and accessories. IDI’s insulation equipment and products are built with safety in mind but we know there is always more we can provide to keep our customers safe. From equipment to protective gear IDI offers a wide variety of safety products to ensure each job is done in a safe and secure fashion. Browse our safety equipment and accessories below!

 

See More Accessory Products >>

Protective Coveralls

IDI carries a wide selection of high-quality coveralls that will keep your crews safe and clean. Our selection offers DuPont TYVEK® and SAS Safety’s Moon-Suits — built for superior protection while being reusable, lightweight, and breathable.

  • Styles available with or without hoods and booties
  • Various sizes available

» Order Online


Gloves

  • Powder-free nitrile gloves
  • String-knit blue latex coated
  • Brown Jersey

Sizes available: 4 mil, 8 mil
Colors available: blue, black

» Order Online


Disposable Respirators and Dust Masks

Think safety! Wear dust masks when installing all types of blown insulation.

  • 3M & SAS Safety masks offered with or without exhaust valves
  • NIOSH N95 or P100 approved particulate respirators

» Order Online


Head Socks and Shoe Covers

Protect your head and hair with a cotton blend, comfortable head sock

Tyvek shoe covers keep your footwear free of foam and other debris.

» Order Online


Safety Glasses and Goggles

IDI offers a variety of eye protection types:

  • Clear or tinted lenses
  • Wrap-around
  • Anti-fog
  • Sealed

For ultimate protection, ask your local IDI rep about Advanz Goggles, which come with frame advances.

» Order Online


IDI First Aid Kits

ANSI-approved first aid kit with eyewash solution and hospital quality contents to treat a variety of job site injuries—a must have on any foam rig!


FULL-FACE CARTRIDGE RESPIRATORS

Full-face cartridge respirators are perfect for the team assisting during a spray job. Although the sprayer should use a fresh air supply, cartridge respirators are perfectly safe for everyone else involved in the project, depending on ventilation and vicinity to the sprayer. The comfort, fit, and reliability of these industrial respirator masks ensure you can work on your project without being distracted, which boosts productivity.

  • Dependable & convenient protection
  • Offers easy breathing, comfort, and durability
  • Fit test/health card required

Our cartridge respirator masks use NIOSH approved P100 cartridges, which protect the wearer against VOC and particulate.

Brands Available:

  • North by Honeywell
  • 3M

Safety note: Cartridges must be changed out every 8 hours to ensure safety. Store the respirator in a sealed bag when it is not in use.

» Order Online


HALF-FACE CARTRIDGE RESPIRATORS

These respirators are reusable respirators to meet the needs of the work environment. Half or full facepiece reusable respirators help protect against both particles and/or gases and vapors. With these respirators, you always use organic vapor/particulate (P100) cartridges when you are around SPF. There are different kinds of cartridges for different kinds of gases and vapors so speak with your local IDI location for info on what you will need based on the job requirements.

Brands Available:

  • North by Honeywell
  • 3M

Safety note: Cartridges must be changed out every 8 hours to ensure safety. Store the respirator in a sealed bag when it is not in use.


Combination Gas & Vapor Cartridges

N-Series combination cartridges with P100 particulate filters.

  • NIOSH approved for use against organic vapors and 99.97% filter-efficiency for all particulates
  • Comes in a pack of two

Safety note: Cartridges must be changed out every 8 hours to ensure safety. Store the respirator in a sealed bag when it is not in use.

» Order Online


LOW-PRESSURE SAR RESPIRATORY FRESH AIR SYSTEM

Supplied Air Respirator (SAR) systems provide a continuous flow of clean air to the hood or mask you’re wearing. SAR systems are the only systems that should be used by the sprayer during high-pressure indoor foam applications. A low-pressure source would be an ambient pump (an air compressor designed specifically for respiratory protection applications) located in, or drawing air from, a clean environment.

Low-pressure fresh air systems provide all of the benefits of other air systems, but with less hassle and maintenance. There is no calibration required, and you don’t need a large compressor, which makes this the most convenient system available. For those looking for a smaller investment for their fresh air system, the low-pressure fresh air systems are for you.

Brands Available:

  • Bullard
  • Allegro

Safety note: Air pumps must be placed in a fresh air zone. Follow the scheduled maintenance for filter change to ensure that your product is working correctly.


HIGH-PRESSURE SAR RESPIRATORY FRESH AIR SYSTEM

A high-pressure supply source would be either a cylinder or “cascaded” cylinders of breathing air or the compressed air supply within a facility/spray foam rig as long as it is filtered and monitored to ensure it meets OSHA’s purity requirements for breathing air.

If you want the most complete fresh air system, a high-pressure system is what you are looking for. These systems are usually mounted in the trailer or come in a pelican carry case, and they require a compressor large enough to supply the proper flow and pressure to the system. The longer hose length, better cooling options, and reduced setup time make this the most efficient system available.

Brands Available:

  • Bullard
  • Allegro

Safety note: Air pumps must be placed in a fresh air zone. Follow the scheduled maintenance for filter change to ensure that your product is working correctly.


PAPR Respirators

Powered Air Purifying Respirators (PAPR) come in the form of a hood or a full-face mask. The hood or mask filters out pathogens and pollutants and delivers clean air to the user. Filters must be changed out with the same frequency as cartridge respirators, and the system should be rated for Hazardous Locations (HL).

Brands Available:

  • Bullard

Safety note: It should be noted that the cartridge respirators and the PAPR systems are not to be used by the sprayer during high-pressure indoor foam applications.


Honeywell Fendall Pure Flow 1000® Mounted Eyewash Station

• Easy installation. No plumbing required.
• Factory-sealed fluid cartridges eliminate mixing and measuring.
• Easy-to-activate sure-grip handle provides instant, simple activation.
• Unique nozzle design delivers a soft “ribbon” of our buffered saline solution.
• Permits thorough flushing with a constant flow rate and stream height
that provides 0.4 gpm for entire 15-minute cycle.
• Captures waste fluid to eliminate spill hazards and simplify fluid disposal
• Integral valve at bottom of unit allows easy draining of reservoir after use.
• 24-month cartridge life*
• Cartridges remain sealed until activated.
• Made in the USA

PRODUCT ID + DESCRIPTION
32-001000-0000 | Pure Flow 1000 Station
32-001050-0000 | Pure Flow 1000 Cartridge


Honeywell Double Wall Station

• Sealed, sterile bottles contain Honeywell Saline – a buffered, saline solution superior to tap water for emergency eye care
• Blow-fill-seal bottles are tamper resistant, yet easily removed in an emergency
• Extended flow opening provides longer flow rate than conventional bottles
• Durable, open face design holds bottles firmly in place with easy access
to bottles in an emergency
• Mounts to wall with provided screws
• Durable plastic is easy to clean
• Simple, highly visible operating instructions are provided on each
unit – 16- and 32-oz. bottles feature trilingual instructions
• Ensured quality and lasting value with FDA-grade polyethylene bottles featuring lot numbers and expiration dates
• Does not meet ANSI Z358.1 15-minute flushing requirement
• Made in the USA

PRODUCT ID + DESCRIPTION
32-000462-0000 | 32-oz. Double Wall Station


Genuine First Aid A-Med Eyewash Station

• 32 oz. Bottle Size
• 3 to 4-1/2 yrs. Shelf Life
• 13-1/4” Height, 17-1/2” Width

PRODUCT ID + DESCRIPTION
5020-0304 | A-Med Eyewash Station (2) 32oz w/eye-opener


3M SPILL KIT

Spill kits and stations clean up liquids including oil and chemicals to prevent
slips and falls. They contain supplies for mopping up spills and are
suitable for warehouse, factory, refinery, and jobsite locations.

PRODUCT ID + DESCRIPTION
28910 | Sorbent or Chemical Clean-Up Kit – Sack, Application: Hazardous Materials, 12-1/2 gal Absorbent Capacity per Kit


BULLARD HARD HATS MODEL S61

You’ll find comfort and protection with style in the Standard Series. Featuring a four-point suspension,
these hats are lightweight, low profile and have a low center of gravity, providing exceptional
balance. Models S61 meets ANSI/ISEA Z89.1, Type I, Class E and G requirements. Model S51
meets CSA Z94.1, Type 1, Class E and G requirements, and EN397 requirements. Model S62 meets
ANSI/ISEA Z89.1, Type I, Class C requirements.

Features
• Available in full-brim, cap style, flat front and vented shell styles
• Low profile design offers sleek style
• Your logo can be applied in any of eight different locations
• Easy to adjust Flex-Gear® ratchet sizing or standard suspensions available
• Ideal for most applications
• Accessory slots accept a wide variety of attachments
• Suspension snaps in with an audible click – users know it’s assembled correctly
• 4-point suspension
• Pillowed cotton, poly, or vinyl brow pads
• ¾” wide seamless nylon crown straps
• Front and rear vertical height adjustments

PRODUCT ID + DESCRIPTION
61**R S61R | Any Color, ratchet
61**R1000 S61R | any color, ratchet, 1 color front logo
61**R2000 S61R | any color, ratchet, 2 color front logo
61**R3000 S61R | any color, ratchet, 3 color front logo
61**R4000 S61R | any color, ratchet, 4 color front logo


BULLARD HARD HAT MODEL ABOVEVIEW

Featuring a see-through visor that allows workers to see hazards overhead, the patented AboveView Full-Brim Hard Hat is designed with a wide brim for increased protection from the elements and comes equipped with accessory slots for a variety of attachments. AboveView meets ANSI/ISEA Z89.1 and CSA Z94.1, Type 1, Class E and G requirements.

COMFORT
AboveView comes with all the standard Bullard hard hat comfor features, including ¾’ seamless suspension, large absorbent cotton or easy-to-clean vinyl brow pad, Flex-Gear® ratchet suspension, and front, side, and rear vertical height adjustment settings. Like all Bullard hard hats, the AboveView is designed for users to experience the ultimate comfort while on-the-job. AboveView sits below the “nape” portion of the user’s head ensuring a secure fit and lessening the possibility of the hat falling off while working.

STYLE
AboveView’s sleek full-brim design and see-through visor combine for a perfect fit with a look that workers prefer.

VERSATILITY
AboveView is the only hard hat with a replaceable clear brim visor. Replacement visors are available in clear, grey, and yellow tints. The AboveView is available in all Bullard standard colors and can be customized with striping and logos.

PRODUCT ID + DESCRIPTION
AV**RC | aboveview, any color, ratchet, clear
AV**RG | aboveview, any color, ratchet, gray
AV**RY | aboveview, any color, ratchet, yellow
AV**RC1000 | aboveview, any color, ratchet, clear, one color front logo
AV**RC2000 | abovieview, any color, ratchet, clear, 2 color front logo
AV**RC3000 | aboveview, any color, ratchet, clear, 3 color front logo
AV**RC4000 | aboveview, any color, ratchet, clear, 4 color front logo
AV**RG1000 | aboveview, any color, ratchet, grey, 1 color front logo
AV**RG2000 | aboveview, any color, ratchet, grey, 2 color front logo
AV**RG3000 aboveview, any color, ratchet, grey, 3 color front logo
AV**RG4000 aboveview, any color, ratchet, grey, 4 color front logo
AV**RY1000 aboveview, any color, ratchet, yellow, 1 color front logo
AV**RY2000 aboveview, any color, ratchet, yellow, 2 color front logo
AV**RY3000 aboveview, any color, ratchet, yellow, 3 color front logo
AV**RY4000 aboveview, any color, ratchet, yellow, 4 color front logo

 


IDI: America's Wholesale Insulation Safety Equipment & Accessories Distributor

Contact Us

View Spec Docs

IDI Locations

Contact Us

The health and safety of our employees, customers and communities is our top priority.Read about our response to COVID-19.