GSP CIRR D-BOND™ CRYSTALLIZED ISOCYANATES RESIN REMOVER
Material Numbers:
- 1 Gallon Pail – 1002071
- 5 Gallon Pail – 1002072
Immersion ONLY – not intended for flushing
CIRR D-BOND is an immersion resin and polymer remover, developed to remove uncured and cured deposits of isocyanates and build-up that has been sitting on spray foam equipment. Tough on polymers, resins, adhesives, paints, lacquers, varnishes, latex, rubber, but gentle on the environment. CIRR D-BOND is ideal for cleaning equipment and parts pulled out of operation for overloading and unusable due to cured polymer and resin buildup.
- Contractors Use CIRR D-BOND For: Removing uncured and cured deposit build-up of isocyanates on spray foam equipment.
- Manufacturers Use SURF X FLUSH 2000™ For: Removing uncured and cured deposit build-up of Diisocyanates lines, metering equipment, feed lines, mixing heads, hoses, kettles, pump packaging, , and much more!
- OEM’s Use SURF X FLUSH 2000™ For: Removing uncured and cured deposit build-up in the automotive, aerospace, injection mold, foam sheathing insulation, DOT, and cushioning industries.
This is a carousel with one large image and a track of thumbnails below. Select any of the image buttons to change the main image above.
- Non-HAPs, non-flammable, recyclable, non-corrosive
- No ingredients are listed on CA PROP 65 or EPA HAPS
- Ideal replacement for Methylene Chloride, MEK, N-Methyl-2-Pyrrolidone “NMP-based formulations”
- Safe and compatible with most O-rings, gaskets, rubber seals, and safe of all metals
- Available in one-gallon Easy Pour jugs, 5-gallon pails, 55-gallon drums, and GO GREEN ™ Pre-saturated Wipes
CIRR D BOND™ Specs
CIRR D BOND™ Safety Data Sheet
