GSP NZD ISO Flush 1 gal Isocyanate Resin Cleaner and Neutralizer D-W359585-P

Isocyanate Resin Cleaner and Neutralizer is highly effective in flushing excess liquid Isocyanate from processing equipment (feed lines, feed tanks, mixing and metering equipment), as well as loosening and removing partially crystallized Isocyanate residue and build-up from equipment and parts. No need to pre-flush Part (A) with mineral oil before using.

• High resin/polymer loading
• Replaces solvents such as NMP, Acetone, MEK, Methylene Chloride
• Low rate of evaporation
• Removes liquid & semi-hardened Isocyanate Part (A), Polyol Part (B), cured Polyurethane
• Effective on Reactive Hot Melt Adhesives from Roll Coating & Dispensing Equipment
• Removes industrial resins such as Polyester, Vinylester, Epoxy, Pigmented Gel Coats
• Effective on Fiberglass and Resin Mixtures
• Cleans coatings such as High and Low Solid Aliphatic, Waterborne Epoxy Primers
• Removes Polyurethane, Acrylic, Varnishes, and Alkyl Enamel

• Appearance: Clear Liquid
• Flash Point: (Seta Flash) 147.50 °F
• Odor: Mild Organic Ester
• Surface Tension: 24 (dynes/cm 24) (water = 1.0)
• pH (50% solution in water 68°F): 6.8 - 8.2
• Vapor Pressure: (components) 25 °C [mm Hg] 0.8000
• Initial Boiling Point/Boiling Range ( 760 mm Hg): 385 - 485 °F
• Ideal Operating Temp (°F): Room Temperature
• Ideal Operating Concentration: Full Strength
• Specific Gravity (68°F): 0.895 - 0.900
• Weight/Gal.: 5 gal
• VOC Content (ASTM D-2369, Method 24): 5.9 lbs./gal or 669 grams/liter
• HMIS Rating:
  • Health = 2
  • Fire = 2
  • Reactivity = 0
• Product #: 02-W359585