Tsunami Pure-10 Series 10 Hp 72 x 36 x 23 inch Tank Mounted Regenerative Desicant Air Dryer 21999-0955

The Pure-10 Series Regenerative Dryer is rated for 40 CFM airflow, and fitted for 10 Hp compressors. The Pure-10 system uses a Solenoid Timer Valve to control the dryer and Tsunami pre-filtration to assure removal of water, oil and particulates before entering the dryer.

• Molecular sieve desiccant
• Solenoid valve timer
• Automatic drains
• Purge exhaust mufflers
• Wall mounting brackets
• Easy-Carrying with portable unit
• Tsunami pre-filtration includes the water separator and oil coalescing filter to remove liquid water, bulk oils and particulate
• Tsunami’s regenerative drying technology uses sweep air to regenerate the towers during operation. It's like changing the desiccant every two minutes
• The Pure 10 is efficiently designed and constructed with very few moving parts, reducing potential stress points

• Low relative humidity - down to .01% RH
• Dew points down to -80°F
• Easy, low-cost maintenance

• Drain Type: Pneumatic
• Number of Towers: 2
• Number of Towers Drying: 1
• Number of Towers Regenerating: 1
• Minimum/Maximum Air Inlet Temperature: 150°F
• Minimum/Maximum Operating Pressure: 175
• Power Requirement: 120V or 220V
• NPT: 1/2 inch Inlet / 1/2 inch Outlet
• Orifice: 0.030 inch
• CFM Consumption: 2.2
• Cycle Time: 2 minutes
• Tower Drying Time: 120 seconds
• Maximum CFM: 40
• Height: 72 inches
• Width: 36 inches
• Depth: 23 inches
• Weight: 190 lbs