Tsunami Pure-10 Series 40 CFM 29 x 25 x 8 inch Regenerative Air Dryer 21999-1010-MM

The Pure-10 Series Regenerative Dryer is rated for 40 CFM airflow, and fitted for 10 Hp compressors. The Pure-10 system uses a Solenoid Timer Valve to control the dryer and Tsunami pre-filtration to assure removal of water, oil, and particulates before entering the dryer.

• Molecular sieve desiccant
• Solenoid valve timer
• Automatic drains
• Purge exhaust mufflers
• Wall mounting brackets
• Tsunami pre-filtration includes the water separator and oil coalescing filter to remove liquid water, bulk oils and particulate
• Tsunami’s Regenerative Drying Technology uses sweep air to regenerate the towers during operation. It's like changing the desiccant every two minutes
• The Pure 10 is efficiently designed and constructed with very few moving parts, reducing potential stress points

• Low relative humidity - down to .01% RH
• Dew points down to -80°F
• Easy, low-cost maintenance

• 1st Stage Water Separator
  • Removes liquid water
  • Filters particulate down to 10 micron
• 2nd Stage Oil Coalescing Filter
• Removes bulk oils and aerosols
• Filters particulate down to .01 micron

• No. of Towers: 2
• No. of Towers Drying: 1
• No. of Towers Regenerating: 2
• Orifice: 0.030 inch
• CFM Consumption: 2.2
• Cycle Time: 2 minutes
• Tower Drying Time: 120 seconds
• Drain: Float
• NPT: 0.5 inch Inlet / 1 inch Outlet
• Minimum/Maximum Air Inlet Temperature: 150°F
• Minimum/Maximum Operating Pressure: 175
• Height: 29 inches
• Width: 25 inches
• Depth: 8 inches
• Weight: 62 lbs