Graco Husky 716 1/4 x 3/4 x 3/8 inch NPT Female Aluminum Air Operated Diaphragm Pump 241407

The Husky 716 air operated diaphragm pump features an external controller for remote control capabilities.

Features:

Center- and end-porting
No mechanical seals which causes fluid leaks or failures
Runs quietly at less than 85 dBa with easy-to-use remote muffler capability for even lower noise levels
Easy-to-service air valve and ball checks
3/4 inch (19.05 mm) center- and end-porting
No seals to leak or fail
Quiet running less than 85 dBa with easy-to-use remote muffler capability for even lower noise levels
Easy-to-service air valve and ball checks

Technical Specifications:

Air Exhaust Port Size: 3/8 inches
Air Exhaust Port Thread Gender: Female
Air Exhaust Port Thread Type: NPT
Air Inlet Size: 1/4 inch
Air Inlet Thread Gender: Female
Air Inlet Thread Type: NPT
Application: Industrial
Ball Material: Buna-N
Center Section Material: Polypropylene
Compatible Material: Antifreeze, Detergents, Motor Oil, Grease & Oil, Hydraulic Fluid, Cutting Oil, Water - Wastewater Treatment, Water, Ink
Compressor Required: Yes
Connection Type: Threaded
Diaphragm Compatible Material: Buna
Diaphragm Material: Buna-N
Fluid Inlet Size: 3/4 inches
Fluid Inlet Thread Gender: Female
Fluid Inlet Thread Type: NPT
Fluid Outlet Size: 3/4 inches
Fluid Outlet Thread Gender: Female
Fluid Outlet Thread Type: NPT
Fluid Section Material: Aluminum
Manifold Configuration: Center Port
Manifold O-Ring Material: PTFE
Material: Aluminum
Maximum Air Consumption: 28 SCFM
Maximum Air Pressure: 0.7 MPa / 100 PSI
Maximum Cycle Rate: 400 CPM
Maximum Flow Rate: 16 GPM
Maximum Fluid Pressure: 0.7 MPa / 100 PSI
Maximum Operating Temperature: 225°F
Maximum Solid Size: 0.0937 inch
Minimum Operating Temperature: 40°F
Model: Husky
Overall Height: 10.43 inches
Power Source: Air
Seat Material: Polypropylene
Series: 716
Standards Met: ATEX, CE
Type: Pneumatic Diaphragm Pump

Operational Specifications: