Graco T3 3:1 Ratio Carbon Steel Supply Pump 24Z834

Transfer Pumps are required to move A and B materials to the Reactor Spray Systems. The T3 Transfer Pump combines Graco’s proven Merkur air-motor and popular T2 stainless steel lower. The T3 is a 3:1 ratio pump – using less air pressure to provide the same fluid pressure required.

• Easier to maneuver - The overall height of the T3 is 3.7 inches shorter above the drum than the T2, making it easier to remove from the drum inside of a spray rig
• More quiet – Studies show the T3 Transfer Pump is about 3x more quiet than the T2 Transfer Pump
• Less maintenance - the Merkur air-motor is based on air pilot valve technology. The air-motor switching is purely pneumatic. This differs from T1 and T2 Transfer Pumps, which use a mechanical reversing mechanism in the air-motor

• Model: T3
• Pump Ratio: 3:1
• Construction: Carbon Steel
• Material: Carbon Steel
• Package Options: Bare
• Air Inlet Size: 1/4 inch
• Air Inlet Thread Gender: Female
• Air Inlet Thread Type: NPT
• Application: Industrial
• Compatible Material: Polyurethane Foam, Polyurea
• Fluid Outlet Size: 3/4 inches
• Fluid Outlet Thread Gender: Female
• Fluid Outlet Thread Type: NPT
• Maximum Air Inlet Pressure: 0.69 MPA
• Maximum Air Inlet Pressure: 100 PSI
• Maximum Flow Rate: 4.5 GPM
• Maximum Operating Temperature: 190 °F
• Maximum Working Pressure: 2.2 MPA
• Maximum Working Pressure: 315 PSI
• Package Options: Bare
• Sound Power Level: 82.8 dB(A)
• Type: Pneumatic Piston Pump
• Weight: 22 lbs

• Height: 8.25 inches
• Length: 60 inches
• Width: 7.75 inches
• Volume: 2.22 ft³