Xpress Seal Stud Seal SG 5G Flowable Elastomeric Sealant

• A high quality, plasticizer-free, water-based, 100% acrylic latex sealant for brush, manual, electric, and hydraulic pump, or spray application
• Unique formulations allow the product to flow but still maintain a high film build without sag
• Designed to provide a long-lasting flexible seal that will retain this flexibility even in the harshest climatic conditions
• Has excellent adhesion to most materials including wood, masonry, PVC, polyurethane foam, concrete, and metal
• Permeability allows trapped moisture to escape while maintaining an airtight seal
• Low odor and zero VOC

General: Surfaces to be coated should be dry, free of dust, dirt, oil, loose granules, gravel, peeling coating, and other foreign manner.

This product may be brushed pumped, or sprayed on a clean, dry surface. The product must be applied between temperatures between 40° F and 100° F. Product should be allowed to cure for 24 hrs. prior to the installation of drywall that will have direct contact with the sealant.

Stud Seal SG is intended for air sealing a building envelope by providing a gasket between the studs and drywall. By applying Stud Seal SG at the top plate of walls below the attic, you will reduce the air leakage in the home. Homes with a high level of air tightness will have improved energy efficiency, better indoor air quality, and an increased comfort level for the occupants. Better air sealing techniques may also help your home meet requirements for rebate programs like Energy Star under The Inflation Reduction Act of 2022.

The surface must be clean and dry. Do not apply over wet substrates. Complete cure of Stud Seal SG requires complete evaporation of water. Cool temperatures and high humidity retard cure. It is not intended for use as a thermal barrier.

This product cures by water evaporation only. The product must not be applied when the ambient temperature is below 40°F or if there is any possibility it could fall below 32°F within 24 hours of application.

This product is designed for professional installation. Before working with this product, you must read and become familiar with the available information on its risks, proper use, and handling. Information sources include but are not limited to MSDS and product labels.

• Elongation: 473% + 25
• Tensile Strength: 329 psi + 25
• Perms: 7
• Solids Volume: 70% + 2
• Solids Weight: 65% + 2
• VOC: 0 g Liter
• Density: 7.3 lbs/gal
• Temperature Limit: 0° F to 185° F
• Low Temp Flexibility: Passes 180° Flex over 1/2 Mandrel @ 15° F
• Size: 5 gallon
• Color: Patina Green
• Dry Time: (75° F 50% humidity): 4 hours
• Net Weight Per Pail: 7 days
• Complete Cure: 36.5 lbs/pail