SWD Urethane Quik-Shield 1929F 55G Flame Retardent Acrylic Coating White

Quik-Shield 1929F is a high solids, heat resistant, water based, elastomeric coating material made from 100% acrylic polymers. It prevents degradation to roofing caused by normal weathering, aging, and ultraviolet exposure. QS1929F is a flame retardant coating that is odor free and fast drying.

• Clean surfaces according to “Preparation of Substrates” section
• Ambient/substrate temperatures should be between 50-130°F. Higher and lower application temperatures are possible, contact SWD technical support for more details
• Flush an adequate amount of material through the lines/gun prior to spraying desired surface when changing between systems. Flush amount will be dependent on prior system used
• Before application, test material to ensure that material sprays, cures, and hardens properly
• Inspect applied material intermittently to ensure no problems exist. If problems are detected, discontinue application and inspect all substrates, equipment, gun, and liquid material for problem source(s)
• Never allow liquid components to run out
• Allow product to cure a minimum of 4 to 6 hours before applying additional coat layer

• CRRC 0658-0001: White-colored Coating: Solar Reflectance Index 84, Solar Reflectance 0.69, Thermal Emittance 0.87
• Product Color: White
• Container Size: 55 gallon