Great Stuff PRO 14 Foam Dispensing Gun - 7.75 in Barrel

No-drip precision application, Great Stuff Pro 14 Dispensing Gun provides total control over every seal, ensuring professionals get the maximum yield out of every can.

• Lightweight, high-strength aluminum body with a metal trigger
• Flow-control mechanism dispenses foam beads from 1/8” to 3”
• Provides greater precision and access to hard-to-reach areas
• Non-stick coated can adapter and needle
• Large flow control knob with secured back-screw system
• Replaceable smooth dispensing spray foam nozzle
• Works with all GREAT STUFF PRO cans
• No-drip foam spray dispensing gun
• Includes plastic tapered tips

• Type: Dispensing Gun
• Size: 14 oz

• With the can secured, set your desired bead size by adjusting the flow control knob on the back of the gun (bead can be adjusted from 1/8"-3"). Then, pull the trigger to fill the gun with foam, dispensing excess foam into an appropriate waste receptacle. Lastly, test the bead size before applying
• Tighten the flow control screw until fully closed for storage. Use can within 30 days of initial use
• Store can upright with a foam dispensing gun attached
• Always leave a can of foam attached to the gun with the flow control screw closed
• When ready to change cans, shake the new can of foam for a minimum of 60 second
• Never leave a gun without a can of adhesive without a can of Great Stuff Pro attached unless the gun has been thoroughly cleaned with Great Stuff Foam Cleaner