
Graco Probler P2 Standard Gun Assembly with 03 Mix Chamber Kit GCP2R3
Details
The Probler P2 gun is lightweight and easy to maneuver - even in difficult spraying positions. Its double piston design provides more than 300 pounds (136 kg) of triggering force - much more than a smaller piston diameter.
Features:- Easy daily maintenance
- Responsive trigger action
- Easy-to-replace mix chamber insert
- Anti-crossover design virtually eliminates possibility of material entering the air piston
- Ergonomic handle and balanced design
- Height: 12 inches
- Length: 9.6 inches
- Width: 3.6 inches
- Volume: 0.24 ft³
- Air Inlet Size: 1/4-18 inches
- Air Inlet Thread Gender: Male
- Air Inlet Thread Type: NPSM
- Compatible Material: Adhesives, Polyurethane, Roof Coating, Polyurea, Polyurethane Coating
- Component A Inlet Size: 1/2-20 inches
- Component A Inlet Thread Type: UNF
- Component B Inlet Size: 7/16-18 inches
- Component B Inlet Thread Type: UNF
- Component Type: Plural-Component
- Fluid Orifice Size: 0.06 inches
- Gun Activation: Manual
- Gun Series: Standard
- Gun Type: Air-Purge
- Gun Weight: 3.9 lbs
- Maximum Air Inlet Pressure: 0.76 MPa
- Maximum Air Inlet Pressure: 110 psi
- Maximum Air Pressure: 0.76 MPa
- Maximum Air Pressure: 110 psi
- Maximum Flow Rate: 40 lbs/min
- Maximum Fluid Pressure: 24.1 MPa
- Maximum Fluid Pressure: 3500 psi
- Maximum Fluid Temperature: 200 °F
- Maximum Fluid Working Pressure: 22.1 MPa
- Maximum Fluid Working Pressure: 3200 psi
- Minimum Air Inlet Pressure: 0.62 MPa
- Minimum Air Inlet Pressure: 90 psi
- Minimum Flow Rate: 3 lbs/min
- Mix Chamber: 03 (.060)
- Model: P2
- Overall Height: 4.76 inches
- Overall Length: 3.110 inches
- Overall Width: 6.85 inches
- Pattern Size: 14 inches @ 24 inches from target
- Purge Method: Air
- Series: Standard
- Spray Gun Mix Type: Impingement
- Spray Pattern: Flat
- Type: Spray Gun
- Wetted Parts: Stainless Steel, Carbon Steel, Chemically Resistant O-Rings, PTFE