Graco Probler P2 Dispense Gun Hardware Kit GC1947

The Graco Hardware Kit is used for Probler P2 Dispense Gun.

• Height: 1.25 inches
• Length: 6 inches
• Width: 3 inches
• Volume: 0.013 ft³

li>1 x 249112 - 0.057 inches Drill Bit
• 1 x GC0069 - 0.071 inches Drill Bit
• 1 x 246629 - #58 Drill Bit
• 1 x 248891 - #66 Drill Bit
• 1 x GC0083 - 0.049 inches Drill Bit
• 1 x GC2394 - Swivel 1/4 inches NPT Fitting
• 1 x GC2212 - Connector Fitting
• 1 x GC2334 - Connector Fitting
• 1 x GC0086 - 3/16 inches Ball Driver
• 1 x GC0087 - 5/32 inches Ball Driver
• 1 x 117661 - Pin Vise
• 2 x GC2496 - 40 Mesh Screen Filter
• 1 x 246628 - #55 Drill Bit
• 1 x 246627 - #53 Drill Bit
• 1 x 246625 - #44 Drill Bit
• 1 x 117517 - O-Ring
• 1 x 248128 - Side Seal (6-Pack) O-Ring
• 1 x 125572 - Nipple, 1/8 NPT x #5 JIC Fitting