Hunter Panels Foil-Grip 1402 3 inch x 100 ft Tape

Foil-Grip 1402 is a pressure sensitive, 40-year cycle, general purpose rolled sealant. It provides an instant water resistant grip to most surfaces including Hunter Xci polyiso products.

Surfaces must be clean and free of moisture and contamination. Do not apply this product in areas where temperatures will exceed 200°F. Keep out of the reach of children. Review MSDS for safety information prior to use. DO NOT use where acidic or alkaline chemicals are present (ie., lab fume hood, vents, etc.) For Industrial Professional Use Only

• Temperature: 35°F to 110°F (1.7°C to 44°C)
• Method: Cut desired length, peel off release liner, apply. Removal or repositioning may damage tape and surface. Overlap at ends. Use squeegee with heavy pressure to assure complete contact
• Preparation: Surface must be dry and free of dirt, oil and grease
• Clean Up: UN-TACK or Solvent (Use safe handling practices)

• Appearance: Mill finish aluminum substrate with gray adhesive/sealant
• Backing: Aluminum
• Thickness: 17 mils
• Sealant Material: Modified butyl
• Peal Strength: 16 per linear inch
• Tensile Strength: 955 psi avg
• Elongation: 560% avg
• Flexibility: Excellent, no cracking
• Bonding Time: Instant high tack, full bond 24 hours
• Time to Test: Immediate
• Service Temperature: -20°F to 200°F
• Weather Resistance: Passes 2000 hours QUV (When tested in accordance with ASTM G 53)
• Mildew Resistance: Mold & mildew resistant
• VOC: 0 g/l
• Pressure Classes: SMACNA 1/2, 1, 2, 3, 4, 6 and 10 inches w.g
• Seal Classes: SMACNA A, B, C
• Packaging: 100 ft. rolls in 2, 3, 4, 6 and 36-inches widths 400 ft.² per case
• Shelf Life: 24 Months
• Flammability: Non-flammable