Thermax 0.75 inch White Finish NH Insulation

DuPont Thermax White Finish NH Insulation is a polyisocyanurate insulation and interior finish system for interior masonry or concrete walls, plus walls and ceilings in metal and concrete or masonry buildings, as governed by building codes. The glass-fiber-reinforced polyisocyanurate foam core is faced with a nominal 1.25-mil embossed white acrylic coated aluminum on one side and 0.9-mil smooth aluminum on the other. The white embossed surface of Thermax White Finish NH is aesthetically pleasing and easy to clean and can be pressure-washed up to 1,000 psi with a 15-degree or greater spray tip (at minimum 3’ distance). DuPont Thermax Brand insulation delivers wall performance you can count on. It’s ready to meet your toughest building challenges - both outside and inside the wall - with a robust polyiso insulation product line and an R-Value that’s proven consistent over time and a range of temperatures.

• Easy to cut, handle, and install
• Easy to use
• Aesthetically pleasing white finish for interior applications
• Can be installed exposed to the interior without a thermal barrier
• Pressure washable up to 1,000 psi
• Moisture resistant
• Helps reduce the potential for condensation within the wall assembly
• Manufactured utlizing halogen-free flame retardants
• Zero ozone-depleting potential
• Long-term thermal resistance
• R-Value of 5.1 at 0.75" thickness

• Type: NH Insulation
• Nominal Board Thickness: 0.75 inch
• R-Value: 5.1
• Board Size: 4 x 8 ft
• Edge Treatment: Square Edge