Hunter Panels Xci CG R-12.1 1 x 48 x 96 inch Polyisocyanurate Thermal Rigid Insulation Panel 319100

Xci CG is a thermal rigid insulation panel composed of a closed cell polyisocyanurate foam core manufactured on-line to premium performance coated glass facers with a light color face on one side of the board and a dark color face on the other side.

• Can be installed directly on steel studs in a variety of wall assemblies without the need for gypsum sheathing
• Provides continuous insulation (ci) for standard wood frame, FRT wood frame, steel stud, CMU and concrete exterior wall constructions
• Compatible with numerous claddings/finishes including masonry, fiber cement, stucco, terra cotta, mcm, metal, natural stone, stone aluminum, EIFS
• Underslab, below-grade and sandwich panel applications
• Light or dark side may face outward
• Darker color may be desired behind certain claddings and/or joint systems
• Can be applied to the exterior or interior of exterior walls, when separated from the interior by a 15-minute thermal barrier. Please contact Hunter Panels for more information regarding interior applications that require NFPA 285 compliance

• Manufactured with NexGen Chemistry: Zero Ozone Depleting Potential (ODP); Contains no CFCs, HCFCs or HFCs; Virtually zero Global Warming Potential (GWP). Use of Xci products helps reduce the carbon footprint of buildings
• Superior fire performance, durability, dimensional stability, and resistance to mold growth
• Polyiso offers increased R-value per inch vs mineral fiber, XPS or EPS options
• Provides R-values from 6.0 - 25.0 in a single layer
• ASTM C 1289 Type II, Class 2 Grade 2 (20 psi) or Grade 3 (25 psi)
• Available in 4 ft x 8 ft (1220mm x 2440mm) panels in thickness of 1 inch (25mm) - 4 inch (102mm)
• Other widths/lengths are available upon special request

• Building lite-cycle impact reduction
• Environmant product declaration
• Material reuse
• Pre-consumer recycled content
• Construction and demolition waste management

• Compressive Strength: 20 psi* minimum (138 kPa, Grade 2)
• Dimensional Stability: 2% linear change (7 days)
• Moisture Vapor Permeance: <1 perm (57.5ng/(Pa•s•m²))
• Air Permeance: <0.001 L(s.m²) at 75 Pa
• Impact Resistance(Janka Ball Test): 15
• Service Temperature: -100° to 250°F (73°C to 122°C)
• Flame Spread Index (faced): <75
• Smoke Developed (faced): <450
• Resistance to Mold: Passed (10)
• Recycled Content: 9% pre-consumer
• R-Value: 6.0
• Board Type: Insulation Board
• Thickness: 1 inch
• Length: 96 inch
• Width: 48 inch