Hunter Panels Xci Foil Class A Plus R-10 1.6 x 48 x 96 inch Polyisocyanurate Rigid Insulation Panel 354393
Xci Foil Class A Plus is an energy efficient rigid insulation panel composed of a closed cell Class A polyisocyanurate foam core manufactured online to trilaminate foil facers on both sides.
Due to industry regulations and distribution policies, this product is only available to registered customers. If you are a contractor, distributor, or commercial buyer, please log in to proceed. If not, please share your contact details, and we will contact you shortly.
Details
Xci Foil Class A Plus is an energy efficient rigid insulation panel composed of a closed cell Class A polyisocyanurate foam core manufactured online to trilaminate foil facers on both sides. This panel is available in 4 ft x 8 ft sheets and in thickness of 1.0 inch to 3.0 inch. It has been tested to meet air and water barrier requirements to provide all-in-one functionality when seams and penetrations are treated with approved materials. Xci Foil Class A Plus has been specifically designed to be low cost, foil-faced polyiso product with a class A flame spread of less than 25.
Applications- Provides continuous insulation (ci) for standard wood frame, FRT wood frame, steel stud, CMU and concrete exterior wall constructions
- Suitable for external ductwork
- Suitable for masonry cavity wall applications
- Contact Hunter Xci for information regarding interior applications that require NFPA 285 compliance
- ASTM C 1289 Type 1, Class 1 and Class 2, 25 psi
- Available 4' x 8' (1220mm x 2440mm) panels in thicknesses of 1 inch (25mm) - 3 inch (76mm)
- Other widths/lengths are available upon special request - (for example: 16 inch or 24 inch width)
- Zero Ozone Depleting Potential (ODP)
- Contains no CFCs, HCFCs or HFCs
- Virtually Zero Global Warming Potential (GWP)
- Flame spread of <25 per ASTM E 84
- Building lite-cycle impact reduction
- Environmant product declaration
- Material reuse
- Pre-consumer recycled content
- Construction and demolition waste management
- Compressive Strength: 25 psi* minimum (138 kPa, Grade 2)
- Dimensional Stability: 1.5% max linear change (7 days)
- Moisture Vapor Permeance: less than/equal to 0.1 perm (2.875ng/ (Pa•s•m2))
- Water Absorption: less than/equal to 0.1% volume
- Service Temperature: -100° to 250°F (73°C to 122°C)
- Flame Spread Index (faced): <25
- Smoke Developed (faced): < 450
- Recycled Content: 13% pre-consumer
- R-Value: 10.0
- Board Type: Insulation Board
- Thickness: 1.6 inch
- Length: 96 inch
- Width: 48 inch
Specifications
Supplier Part Number
354393
SKU
1010358
Board Type
Polyiso
Brand
Hunter Panels
Length
96 in
Thickness
1 in
Width
48 in