Great Stuff PRO 18 oz Gasket Dispensing Gun
Details
Top plate to attic drywall air sealing is consistently ranked as the #1 air sealing location. Great Stuff Pro Gasket forms a seal between framing lumber and drywall, which can result in up to 1.6 ACH50 reductions. Great Stuff Pro Gasket is a one-component, water-based foam applied to the top plate, bottom plate and around the perimeter of all rough openings. Specially designed to create a flexible, compressible, air seal that will stay in place when drywall is installed. Unlike traditional polyurethane-based foam sealants, this water-based solution and the specially designed gun can be easily cleaned with a garden hose and the included cleanout adapter. *Follow all directions for proper cleaning and disposal. Use only the special blue-handled Great Stuff Pro Gasket Dispensing Gun is to be used with Great Stuff Pro Gasket. Do not use other Great Stuff Pro products in this gun.
Features:- Reusable for up to 90 days when left attached to GREAT STUFF PRO Dispensing Gun with the blue handle. Shake vigorously for 60 seconds before use
- Improves air sealing between drywall and frame
- Compresses when cured to prevent bowing issues with drywall
- Helps meet stricter energy codes
- Air cures in 2 to 24 hours
- Reduces moisture, mold, pollutants and allergens
- Easy cleanup of the gun and uncured drips and spills
- Has shown an 83% improvement over caulk in this application
- High adhesion to top plate prevents material from ripping off during drywall installation
- High Yield of approximately 250 linear feet or more at 1/2" wide bead
- Fast and easy install
- Easy water cleanup - Less gun maintenance and long tool life
- Type: Dispensing Gun
- Size: 18 oz
- Best results if used when product temperature ranges from 60-90°F. Do not allow it to freeze
- If the can sputters, simply shake it some more with the can upside down
- Great Stuff Pro Gasket can be cleaned with just water. Do NOT use Great Stuff Foam Cleaner with Great Stuff Pro Gasket or the Drywall Dispensing Gun. Instead, use the included hose adapter to flush water through the gun into an appropriate waste receptacle
- Let cure before the drywall is installed. It is recommended to let Great Stuff Pro Gasket sit overnight as it can take up to 20 hours for full cure in high humidity situations
- Do not use any other Great Stuff Pro products in the Drywall Gasket gun
- Use a 1/2" wide bead for best results
- The bead will shrink and wrinkle in high humidity. However, as long as the bead maintains at least a 1/8” height, it will perform as designed, depending on the framing
- If humidity exceeds 70%, we recommend a target bead of 5/8”-3/4”. Do not exceed a 3/4” initial bead to prevent sagging