Graco Reactor A-25 Bare Proportioner 262572

The Reactor A-25 is a Graco-engineered spray foam Proportioner that gives you the reliability you expect on the jobsite. It maintains consistent temperature control, even when you're spraying at maximum flow rates - resulting in better quality foam. For spraying foam insulation - applies up to 25 lb per minute.

• Maintains temperature setpoints for better yield
• Maintains consistent output pressure for uniform spray pattern
• Easy to operate and maintain
• Best choice for affordability and durability

• Resettable counter tracks material usage

• Three independent heat zones – ISO, resin, and hose heat
• Provide accurate heat control for reliable spraying to handle different chemical viscosities
• Digital temperature controls

• A quick, easy way to balance system pressures

• Low air consumption for increased efficiency
• Muffler provides low operating noise levels
• Air valve provides smooth and rapid changeover

• For easy disassembly and maintenance

• Prevents isocyanate crystallization on the pump seal and shaft

• Height: 50.4 inches
• Length: 34.8 inches
• Width: 34.8 inches
• Volume: 35.322 ft³

• Air Inlet Size: 1/2 inches
• Air Inlet Thread Gender: Female
• Air Inlet Thread Type: NPT
• Amperage: 18.5 @ 380 V ac (3-Phase WYE), 32 @ 230 V ac (3-Phase Delta), 40 @ 230 V ac (1-Phase)
• Application: Spray Foam
• Applicator Type: Manual
• Compatible Material: Plural Components
• Component A Inlet Size: 3/4 inches
• Component A Thread Gender: Female
• Component A Thread Type: NPT
• Component B Inlet Size: 3/4 inches
• Component B Thread Gender: Female
• Component B Thread Type: NPT
• Component Type: Two Component
• Construction: Carbon Steel, Stainless Steel, Chrome, Aluminum, Fluoroelastomer, PTFE, Nylon
• Flush Type: Solvent
• Frequency: 50/60 Hz
• Gun Type: No Gun
• Includes: Proportioner, Heated Hose
• Material Application: Polyurethane Foam
• Maximum Air Consumption: 28 SCFM at 1500 PSI
• Maximum Air Inlet Pressure: 125 PSI
• Maximum Flow Rate: 25 lb/min
• Maximum Fluid Temperature: 190°F
• Maximum Fluid Viscosity: 1500 cP
• Maximum Hose Length: 210 ft
• Maximum Mix Ratio: 1:1
• Maximum Working Pressure: 2000 PSI
• Minimum Fluid Viscosity: 250 cP
• Model: Reactor
• Overall Depth: 24.5 inches
• Overall Height: 43.5 inches
• Overall Width: 21.5 inches
• Phase: 1, 3
• Power Rating: 12.07 HP / 9000W / 9 kW
• Power Source: Air
• Pressure Type: Low Pressure
• Product Type: Plural Component
• Series: A-25
• Sound Power Level: 80.1 dB(A)
• Sound Pressure Level: 70.2 dB(A)
• System Includes: Bare
• Type: Proportioner
• Voltage: 230V, 400V
• Weight: 310 lbs