SWD Urethane Quik-Shield 108 Yield Monster 0.4 Open Cell B Side Spray Foam Off-White

Quik-Shield 108YM the "Yield Monster" is an open-cell spray foam with an ultra-low density as low as 0.36lb. It is ideal for high–performance and air barrier insulation applications in residential (IRC) and commercial (IBC) construction. Quik-Shield 108YM is a high yielding product with revolutionary expansion and long-range application features to increase jobsite efficiency.

• Leed : Quik-Shield 108YM has a minimum of 20.1% total renewable/recycle content, 2.2% pre-consumer recycled, 2.9% post-consumer recycled, and 15.0% rapidly renewable
• Reentry Times : 1-hour reentry for new residential construction with natural ventilation. 12-hour reentry for commercial/retrofit

• Specific Gravity : 1.06
• Viscosity (cPs) : 400±50
• Blowing Agent :100% Water Blown
• Product Color: Off-White

• Clean surfaces according to "Preparation of Substrates" section
• If priming, follow manufacturer recommendations. Ensure primer is adequately cured prior to application
• It is the contractor’s responsibility to determine if ambient and substrate temperatures are conducive for spraying foam
• When changing between products, flush an adequate amount of material through the lines/gun prior to spraying desired surface. Flush amount will be dependent on prior system used
• Before application, test material to ensure that material sprays, cures, and hardens properly
• Always hold the spray gun perpendicular to the surface being sprayed
• Inspect applied material intermittently to ensure no problems exist. If problems are detected, discontinue application and inspect all substrates, equipment, gun, and liquid material for problem source(s)
• Quik-Shield 108YM can fill an entire wall cavity in a single zipping motion by applying foam right up the middle of the cavity
• Quik-Shield 108YM can be applied with long-range application that enables you to spray an 8 inches lift from up to 15 feet away