SWD Urethane Quik-Shield Dragon No Mix 0.5 lbs Open Cell B Side

Quik-Shield Dragon is an open-cell spray foam insulation that requires no mixing. It is ideal for high–performance and air barrier insulation applications in residential (IRC) and commercial (IBC) construction. Quik-Shield Dragon is free of emissive catalysts and has excellent adhesion. This is a true no mix product, achieving optimal performance without mixing prior or during application, making it quick and seamless to dial-in.

• True no mix
• 0.5 lb/ft3 density
• R-Value 3.9 at 1 inch
• R-Value 3.7/inch at = 3.5 inch
• GREENGUARD® Gold certified
• Excellent adhesion
• Consistent application
• Free of emissive catalysts
li>Leed : Quik-Shield Dragon has a minimum of 20.1% total renewable/recycle content, 2.2% pre-consumer recycled, 2.9% post-consumer recycled, and 15.0% rapidly renewable

• Clean surfaces according to "Preparation of Substrates" section.
• If priming, follow manufacturer recommendations. Ensure primer is adequately cured prior to application
• It is the contractor’s responsibility to determine if ambient and substrate temperatures are conducive for spraying foam
• Flush an adequate amount of material through the lines/gun prior to spraying desired surface when changing between systems. Flush amount will be dependent on prior system used
• Before application, test material to ensure that material sprays, cures, and hardens properly
• Inspect applied material intermittently to ensure no problems exist. If problems are detected, discontinue application and inspect all substrates, equipment, gun, and liquid material for problem source(s)

• Specific Gravity: 1.07
• Viscosity (cPs): 250±50