SWD Urethane Quik-Shield Goblin Low Global Warming Potential 2.0 lbs Closed Cell A Side

Quik-Shield Goblin is a closed-cell spray foam insulation, using Honeywell’s Solstice liquid blowing agent which has a GWP of 1, 99.9% lower than traditional blowing agents meeting GWP initiatives. It is ideal for high–performance and air barrier insulation applications in residential (IRC) and commercial (IBC) construction. Quik-Shield Goblin increases jobsite efficiency, decreases labor and overhead costs, and delivers a lower install cost.

• 2.0 lb/ft3 density
• R-Value 7 at 1 inch
• Consistent per inch R-value
• Class II vapor retarder at 1.82 inch
• GREENGUARD Gold certified
• Cost competitive
• Substrate temps of 40-120 deg. F
• No flammable or hazardous blowing agents

• Specific Gravity : 1.23
• Viscosity (cPs): 250±50

• Clean surfaces according to "Preparation of Substrates" section
• If priming, follow manufacturer recommendations. Ensure primer is adequately cured prior to application
• It is the contractor’s responsibility to determine if ambient and substrate temperatures are conducive for spraying foam
• Flush an adequate amount of material through the lines/gun prior to spraying desired surface when changing between systems. Flush amount will be dependent on prior system used
• Before application, test material to ensure that material sprays, cures, and hardens properly
• Inspect applied material intermittently to ensure no problems exist. If problems are detected, discontinue application and inspect all substrates, equipment, gun, and liquid material for problem source(s)