RMAX R-Seal 6000 35 mil x 12 inch x 50 ft Butyl Rubber Self-Adhered Flashing Tape Black

R-Seal 6000 is a nominal 35mil black woven polyethylene membrane with butyl rubber adhesive.

• All surfaces to which the tape is to be applied should be free of moisture, oils, dust, dirt and other debris that could inhibit adhesion. Clean surfaces with a dry cloth as necessary
• Center tape over surface to be sealed, e.g., board joint, fastener plate, etc
• Do not allow the tape to form voids or buckle as it is applied
• Apply pressure along the entire surface of the flashing to create a good bond using a J-roller or firm hand pressure. Remove all wrinkles and bubbles by smoothing surface and repositioning as necessary
Specifications:
• Width: 12 inches
• Length: 50 ft
• Thickness: 35 mil