Rockwool Roxul Safe 4 x 24 x 48 inch 32 SF Mineral Wool Batt Insulation 167689

Roxul Safe is a semi-rigid, mineral wool batt insulation designed to provide enhanced fire protection in perimeter fire containment systems, floor and wall through penetrations, construction joints, and other fire stopping applications.
Due to industry regulations and distribution policies, this product is only available to registered customers. If you are a contractor, distributor, or commercial buyer, please log in to proceed. If not, please share your contact details, and we will contact you shortly.
Details

Roxul Safe is a semi-rigid, mineral wool batt insulation designed to provide enhanced fire protection in perimeter fire containment systems, floor and wall through penetrations, construction joints, and other fire stopping applications. Designed to provide enhanced fire protection in perimeter fire containment systems, floor and wall through penetrations, construction joints, and other fire stopping applications. These products are non-combustible, fire resistant, and will not develop toxic smoke or promote flame spread even when exposed directly to fire. Moisture-resistant, mildew-resistant, and non-corrosive, Rockwool Roxul Safe also helps to reduce noise transmission into and out of the building for improved occupant comfort.

When Roxul Safe is used with Rockwool Curtainrock, it provides a comprehensive fire-stopping system that has been UL/ULC/Intertek tested and approved for perimeter fire containment systems. Fire stopping insulation should be installed per the listed assembly with compression fitting requirements to form a tight seal between the floor line and exterior curtain wall assembly in perimeter installations so that flame and hot gases cannot pass through the joint. For through penetrations and construction joints, Roxul Safe should be cut as needed for compression fit leaving no voids.

Features:
  • Noncombustible stone wool insulation with a melting point of approximately 2150°F (1177°C)
  • Does not promote smoke or flame spread when exposed to flame
  • Experiences minimal shrinkage to maintain critical line of defense against fire
  • Has low thermal conductivity
  • Is water and moisture resistant; does not absorb moisture to maintain insulating value
  • Does not rot or promote the growth of mildew, fungi or bacteria
  • Is approved for use as a component of UL-and Intertek-approved systems
  • Can earn LEED credits
  • Type IVA compliant
  • Applications:
    • Perimeter fire containment systems
    • Fire-resistive joints (construction joints)
    • Through penetrations
    • Other firestopping applications
    Specifications:
    • Product Type: Batt Insulation
    • Material: Mineral Wool
    • Density: 4.0 lbs/ft³
    • Corrosion Resistance: Yes
    • Thickness: 4 inches
    • Width: 24 inches
    • Length: 48 inches
Specifications
Supplier Part Number
167689
SKU
1000243
Application Use
Fire
Brand
Rockwool
Length
48 in
Thickness
4 in
Width
24 in
Resource & Download