Global Specialty Products SURF X Flush 2000 1G Polyurethane Foam, Resin & Coating Remover D-W189568-J

SURF X Flush 2000 is a highly effective cleaning solution that can be used for Flushing, Low-Pressure Spray, and Immersion cleaning to remove build-up of Hardened ISO (A) lines and hoses, as well as overspray. It has the ability to dissolve polyurethane foam, flexible and rigid elastomer, and molded polyurethane foam. This cleaning effectively cleans MDI and TDI esters, cured reactive hot melt, polyurethane adhesives, industrial adhesives, and mixtures of fiberglass and polyester resin, and vinylester and epoxy resin.

• High resin/polymer loading
• Low rate of evaporation
• Multi substrate - Safe of most Ferrous and non-ferrous metals
• Recyclable via vacuum distillation - Reduced disposal costs - Residue Free
• Compatible and non corrosive on various metals, plastics, glass and ceramics
• Replaces solvents such as NMP, BLO, Acetone, MEK, Methylene Chloride, PM Acetate and 1,1,1 Trichloroethane

• Appearance: Clear Amber Liquid
• Flash Point: 169 °F
• Surface Tension: 24 (dynes/cm 24) (water = 1.0)
• pH: 6.8 - 7.8 (50% solution in water @ 68°F)
• Initial Boiling Point/ Boiling Range: 356 - 396 °F
• Ideal Operating Temp (°F): Room Temperature or maximum heated to 140 °F
• Ideal Operating Concentration: Full Strength
• Specific Gravity: 0.980 - 0.984 (68°F)
• Weight: 1 G

• Health: 2
• Fire: 2

Maximum flushing time is (4) Hours. Do not leave SURF X Flush 2000 in the system over night.