RMAX R-Seal 3000W 2 mil x 3 inch x 150 ft Flashing Tape White

R-Seal 3000W is a nominal 2 mil high strength dead soft white aluminum foil coated with cold weather acrylic pressure sensitive adhesive. The malleable foil conforms to irregular surfaces and applies easily to both fibrous and sheet metal ducts. R-Seal 3000W excels in demanding temperature and humidity applications and provides superior performance and durability over a wide range of environmental conditions.

• All surfaces to which the tape is to be applied should be free of moisture, oils, dust, dirt and other debris that could inhibit adhesion. Clean surfaces with a dry cloth as necessary
• Center tape over surface to be sealed, e.g., board joint, fastener plate, etc
• Do not allow the tape to form voids or buckle as it is applied
• Wipe tape firmly from center out with feathering tool or hand roller to smooth out wrinkles. Applying more pressure yields more surface contact, and therefore, creates a greater bond
• Do not tear tape, cut with scissors or knife
Specifications:
• Width: 3 inches
• Length: 150 ft
• Thickness: 2 mil