Titebond 10.1 oz. Cartridge Radon Sealant Concrete Gray 3251

Titebond Radon Sealant is a non-chemically curing sealant combining flexibility and durability to help prevent radon entry. This permanent sealant allows ± 25% joint movement, is easy to tool, and is UV, mold and mildew resistant. Use on foundation cracks, joints and penetrations, around pipes, foundation coatings normally used for damp proofing and membranes surrounding the foundation. Note: According to the EPA, sealants can help limit the entry of radon through the foundation. It is also recommended that a professionally installed radon mitigation or fan-based system be used in conjunction with this sealant.

• Service temperature range: 0°F to 160°f (-18°c to 71°c)
• Method of application: Cartridge/Caulking gun
• Working time: Approximately 10-15 minutes for a 1/4" bead
• Application directions: 1. surfaces must be clean and free from any material that may prevent adequate adhesion. Properly designed joint not to exceed 1/2” in depth. 2. cut nozzle at 45° angle for a 1/8” to 1/2” bead and place in cartridge gun. 3. Make sure concrete is dried and cured. apply sealant into clean joint. If necessary, smooth bead immediately with a damp sponge. No tooling is required. Product adheres to most substrates expect polyethylene or polypropylene faced membranes. It is the sole responsibility of the user to thoroughly test any proposed use with all substrates to determine project suitability
• Painting: The sealant should be dry to the touch and ready to paint in 2-4 hours with a water-based (latex-based) paint
• Cleanup: Clean uncured material with water. after curing, excess sealant must be cut or scraped away
Features:
• Ideal for: Reducing the entry of radon through the foundation
• Reduces radon entry
• Effective barrier to air, dirt, insects and radon
• Easy paintability and cleanup
• Seals: Concrete, galvanized steel, wood and most common building materials
• Seals foundation gaps
• Mold & mildew resistant
Specifications:
• Type: Elastomeric acrylic
• Calculated VOC: <1.5%
• Color: Conncrete Gray
• Solids: 80%
• Flashpoint: Solvent free/not applicable
• Viscosity: 133,000 cps
• Freeze / thaw stability: Stable
• Storage Life: 24 months in a dry location at or below 75°F
Exceeds:
• ASTM C920 Type S Grade NS Class 25
• ASTM C834 Type OP Grade -18°C
• Federal Specification TT-S-00230C Type II Class A