Increase Efficiency on the Job Site With SealTite Pro Insulation

IDI teams nationwide are committed to providing customers with industry-leading products and expertise. We offer a large selection of SealTite Pro open and closed-cell spray foam insulation, all of which expands to close up even the smallest opportunities for energy waste. When insulating with SealTite Pro spray foam insulation, you are virtually eliminating any areas where energy — and dollars — are escaping.

SealTite Pro insulation decreases energy costs for exterior and interior applications. From small jobs to large, IDI will help you find the right SealTite Pro spray foam for your construction project. Browse our selection of SealTite Pro products, hand-picked by the experts in insulation.

FIND YOUR SEALTITE PRO ORDER HERE:

Review the graphic below to find Carlisle products and their new correlating SealTite PRO name, description and weight. Then get more information on your SealTite Pro product of choice below.

Check Out Our Spray Foam Products Below

SEALTITE PRO OPEN CELL

SealTite Pro Open Cell foam is a two-component system of polymeric isocyanate and a resin blend. It’s an open-cell foam intended for application in residential and commercial structures for insulation and sound attenuation. This foam insulator can also be used as a moisture and air barrier, as well as a thermal insulation system on the building’s interior or exterior units. It’s ideal for insulation and noise reduction and does not act as an ozone-depleting agent.

  • R-Value: 3.7 @ 1”; 13 @ 3.5”
  • Core Density: 0.50 lb/cubic foot
  • UVA Compliant* Open Cell
  • No Ignition Barrier Coating required in assembly-specific attic applications

Order Now!


SEALTITE PRO CLOSED CELL

The SealTite Pro Closed Cell foam is specially formulated for cold weather insulation purposes. It’s self-adhering and can be used to create a secure moisture and vapor barrier for interior or exterior building applications. SealTite Pro Closed Cell is an effective insulation choice you can rely on to reduce air, dust pollution, and pest infiltration on your projects.

  • Utilizes rigid polyurethane foam for maximum air sealing capabilities
  • Noise reduction capabilities
  • R-Value: 6.9 @ 1”; 21 @ 3”
  • Core Density: 2.0 lb/cubic foot
  • Standard 2.0 LB Density Closed Cell foam
  • Entirely EPA-approved: Meets all International Code Council (ICC) building codes

Order Now!


SEALTITE PRO OCX

SealTite Pro OCX provides high-quality spray foam that contains +/- 14% bio, renewable, recycled and sustainable content. It was designed for use in assembly-specific attic applications without the need for Ignition Barrier Coating — so your projects can run smoother with less work and resources.

  • Assembly Specific attic applications.
  • R-Value: 3.7 @ 1”
  • Core Density: 0.50 lb/cubic foot
  • Meets Appendix X
  • No Ignition Barrier Coating required in assembly-specific attic applications.
  • Contains +/- 14% bio, renewable, recycled and sustainable content

Order Now!


SEALTITE PRO ONE ZERO

The SealTite Pro One Zero is an industry-leading foam made with HFO technology that results in a higher yield versus other HFC products. It is one of the highest-performing spray foam products that’s been innovated for environmentally friendly spray and use — great for large volume contract insulation work!

  • R-Value: 6.9 @ 1”; 21 @ 3”
  • Core Density: 2.0 lb/cubic foot
  • Has a Global Warming Potential (GWP) of less than ONE
  • Has an Ozone Depletion Potential (ODP) of ZERO

Order Now!


SEALTITE PRO NO TRIM 21

Create the most secure seal and leave behind a professional finish on your residential or commercial insulation project. Choose SealTite Pro No Trim 21 to touch up your insulation project and create an industry-leading finish on every job. Use this foam on all of your projects to avoid excess trim and finish every job to the level of quality your customers expect.

  • R-Value: 4.4 @ 1”; 15 @ 3.5”; 21 @ 5”
  • Core Density: 0.75 LB/Cubic Foot
  • A 0.75 LB density generates R21 in a single 5” pass – R15 in a single 3.5” pass

Order Now!


SEALTITE PRO NO MIX

Increase your efficiency with an open-cell spray foam that provides a quality yield with less effort from you and your crew. SealTite Pro No Mix provides a no-mix convenience to any job, which is perfect for when your crew is tired or your deadline is approaching faster than you thought. Get the yield you expect from your open-cell foam without neglecting quality.

  • R-Value: 3.7 @ 1”
  • Core Density: 0.50 LB/Cubic Foot
  • UVA Compliant Open Cell
  • No mixing required

Order Now!


SEALTITE PRO HIGH YIELD

Have numerous large volume projects coming up or going through more foam than you can keep up with? Go through fewer bags with an open-cell foam that provides a higher yield (and less refill and downtime!). The SealTite Pro High Yield was built for contractors with little time and large projects.

  • R-Value: 3.6 @ 1”
  • Core Density: 0.45 lb/cubic foot
  • UVA Compliant* Open Cell that is optimized for yield
  • No Ignition Barrier Coating required in assembly-specific attic applications

Order Now!


IDI Is Your Trusted SealTite Pro Spray Foam Insulation Supplier

Today’s rising energy costs are putting an increased focus on sustainability, which has resulted in a higher demand for spray polyurethane foam in commercial and residential insulation jobs. Using SealTite Pro insulation will result in less energy use while helping homeowners and their families maintain a comfortable living environment. Find more innovative spray foam products when you browse our spray foam brands. IDI only carries the best in the industry.

View All Spray Foam Brands

IDI: America’s Wholesale SealTite Pro Insulation Distributors

Contact Us

View Spec Docs

IDI Locations

Contact Us

The health and safety of our employees, customers and communities is our top priority.Read about our response to COVID-19.